How to apply a Small Vinyl Decal Sticker

How to Apply Vinyl Decal Stickers

Your Decal will arrive made up of 3 different components.

apply small vinyl decalTo help you with the application of your Decal, there is a diagram to highlight which layer is which.

The three components are as follows:

A. Application layer

B. Backing Layer

C. Vinyl Decal

When you receive your decal in the mail, lay it flat and firmly wipe a credit card or application squeegee across the top of the transfer tape. This helps to make sure the transfer tape properly adheres to the decal.

This is especially important if the decal was shipped in a mailing tube. Below are instructions for small decals and are for applying to cell phones, laptops, car windows, and other similar surfaces.

 

Applying Small Vinyl Decal Stickers

Step 1. Completely clean and dry the desired application surface.

Step 2. Carefully peel the backing paper from the decal at a sharp angle.

Step 3. Align the decal and press it onto the desired surface. Firmly run a credit card across the transfer tape to make sure the decal adheres to the surface.

Step 4. Slowly peel the transfer tape from the top of the decal. If any part of the decal starts to come up with the tape, run over that part of the decal with a credit card and try to peel the tape again.

 

Video on How to Apply Small Car Stickers

 

Removing Vinyl Decals

A razor blade or scraper may be used to remove decals from glass, such as mirrors, car windows, and storefront windows. Do not use a blade or scraping tool on any surface that could be scratched or damaged.

For removing decals from the surface of electronic devices, use your fingernail to peel up the edges of the decal, being careful not to scratch the surface.

A hair dryer may be used to heat the decal and aid in removing it.